• CmdrShepard49@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    7
    arrow-down
    1
    ·
    edit-2
    14 hours ago

    Out of the roughly 20 drives I’ve bought over the last decade or so, the only two failures were Seagate and they only made up five of the drives purchased. The other 15 are WD and all have been great (knock on wood).

    • Glitchvid@lemmy.world
      link
      fedilink
      English
      arrow-up
      3
      ·
      7 hours ago

      I’ve had the same experience. The first HDD that failed on me was a Barricuda 7200.11 with the infamous firmware self-brick issue, and a second 7200.11 that just died slowly from bad sectors.

      From then on I only bought WD, I have a Caviar Black 1TB from oh, 2009-ish that’s still in service, though it’s finally starting to concern me with it’s higher temperature readings, probably the motor bearings going. After that I’ve got a few of the WD RE4 1TBs still running like new, and 6 various other WD Gold series drives, all running happily.

      The only WD failure I’ve had was from improper shipping, when TigerDirect (rip) didn’t pack the drive correctly, and the carrier football tossed the thing at my porch, it was losing sectors as soon as it first started, but the RMA drive that replaced it is still running in a server fine.