2024 will be the year I finally be the year I ditch windows.

I am not exactly new to linux, yet I am far from an expert. I made my journey over the years form trying Ubuntu (many many major revisions ago) and have found myself down the rabbit hole of going Arch. I run Arch with KDE on my laptop. I want to fully ditch Windows on my desktop, however I feel this will be a much bigger hurdle to overcome.

Build Specs: i7-12700KF Copper Modded EVGA RTX 3090 64gb of 3600mhz DDR4 ASUS Tuf Z690 Wifi D4

I could go into more detail about my specs, but the specs aren’t what has made this journey a bit tougher. I use a Line 6 Helix and a Line 6 PowerCab 112+ and both have usb connections to my computer for integration with, you guessed it; windows or mac software only. Now I don’t have a problem running wine, and a number of other solutions to run windows programs, I do however have a gap in knowledge in order to try to use these specific programs with specific USB peripherals.

Now, I am not sure if this is the best way, but I had heard the idea of USB passthrough. And I have no clue where to begin with that. Would this be the direction I should be going for programs such as those?

The only other software that I am going to struggle replacing is the RGB lighting software for all of my hardware. Most of it is corsair (Fans, RAM, Water Cooler, and plugins for the asus motherboard.) And my Steeleseries keyboard which uses GG.

I have looked into using OpenRGB but I was unable to figure out how to get those setup as it wasn’t as plug and play as the manufacturer software, but understandably of course.

The absolute biggest hurdles is my Nvidia problem. I have always had issues with Nvidia on Arch. I would gladly take an suggestion. For reference, I would be using this mainly for my gaming. I occasionally dabble in Stable Diffusion.

I will be running Arch with KDE preferably, but every single time I have had issues.


I suppose any feedback anyone may have would be helpful.


Checklist of things I need to get working on in Arch, any help would be welcomed:

  • Helix Guitar pedal and PowerCab 112+ (USB Passthrough or any other alternatives people may suggest)
  • RGB for SteeleSeries Apex Pro (GG software on windows, open to alternatives)
  • RGB for Corsair (iQue on windows, open to alternatives)
  • Nvidia Drivers
  • lemmyvore@feddit.nl
    link
    fedilink
    English
    arrow-up
    18
    ·
    10 months ago

    Use VirtualBox to make a Windows VM and you pick the USB devices from the menu to connect them on the fly, or you can configure the VM to pass them in by default.

  • lemmyreader@lemmy.ml
    link
    fedilink
    arrow-up
    12
    ·
    edit-2
    10 months ago

    I believe that both VirtualBox and KVM (QEMU) can do USB passthrough. With either one you can have the full Windows OS running on your Linux desktop, which could be more comfortable than going for WINE. Here’s an example with KVM and Arch Linux.

      • Certainity45@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        edit-2
        10 months ago

        You can passthrough your Rtx 3090 into Qemu to achieve hardware acceleration. With software called ‘Looking Glass’ you’ll get a hardware accelerated Qemu/kvm window instead of sacrificing your second monitor or using a kvm switch.

        Level1Linux has made a brilliant videos about Looking Glass.

        You should also passthrough a ssd/nvme disk into your Qemu.

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      8
      ·
      10 months ago

      Been using Arch with KDE on my Lenovo Yoga, both Wayland and X11 depending 9n what I want to accomplish. Though it lead me down the rabbit hole of Weston so that I could run Waydroid from within X11. Ultimately I just decided Wayland basically when I am not using my touchpad or when I want to run Waydroid.

      Year of the Linux desktop, LFG!

  • Dr. Wesker@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    11
    arrow-down
    1
    ·
    10 months ago

    It’s okay to dual-boot, or have independent systems. Just a suggestion, to consider.

    I have 3 daily driven rigs. A MacBook for work, a Linux laptop for most things personal, and a Windows PC for gaming. Everything serves a purpose and specific use case.

    • milkjug@lemmy.wildfyre.dev
      link
      fedilink
      arrow-up
      3
      ·
      10 months ago

      A man after my own heart.

      I had a whole bunch of machines and I just realised I haven’t booted Windows on any of them for a couple of weeks. I daily drive Tumbleweed when I don’t need any advanced Adobe features or play games that run on Windows only.

      I wouldn’t go as far as to say I will ditch Windows completely, but it is nice to have options.

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      3
      ·
      10 months ago

      Funny enough, last time I tried to do the whole 2 systems, I had Arch (with GRUB) on one nvme, and windows 11 on another nvme. At some point, all drives were unbootable. I am lucky I had my important data backed up, and on a separate drive anyways.

      I had thought about it, but I really want to ditch anything windows.

  • ButWhatDoesItAllMean@sh.itjust.works
    link
    fedilink
    arrow-up
    8
    ·
    10 months ago

    Check out OpenRGB to see if it meets your lighting needs. I use it with Corsair Commander Pro, keyboard, mousepad, RAM, QL fans and the ASUS RGB header and attached lighting. It’s been working great on OpenSUSE Tumbleweed for me.

    • ScottE@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 months ago

      Totally agree. OpenRGB works for me.

      Granted, I just turn the “GeForce” light on the GPU off, along with all the other RGB stuff inside the case, but it works. 😁

      • Hellmo_luciferrari@lemm.eeOP
        link
        fedilink
        arrow-up
        3
        ·
        10 months ago

        That’s what I might end up doing. I don’t care as much about the RGB on it as I do functionality. As long as they can go off, I have zero issue with that.

    • Trent@lemmy.ml
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 months ago

      I’ve also had pretty good luck with OpenRGB and some SteelSeries stuff (though my needs are simple).

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      3
      ·
      10 months ago

      If I happen to find a fix, or work around for that issue mentioned I will reach out. I did have Arch running on this machine once, but I didn’t tinker with OpenRGB for my lighting at that point.

  • phrogpilot73@lemmy.world
    link
    fedilink
    arrow-up
    5
    ·
    10 months ago

    For Corsair - I’ve been very happy with ckb-next. https://github.com/ckb-next/ckb-next

    It is pretty robust, allows remapping of key/button bindings, changing of RGB, DPI, etc. Their goal is to replace iCUE. Very robust for mice and keyboards, but they also list other hardware that it is known to work with in their wiki. Might be worth a look.

  • StorageB@lemmy.one
    link
    fedilink
    English
    arrow-up
    5
    ·
    10 months ago

    I have to keep a Windows install around for the sole purpose of pushing firmware updates to my Headrush pedal board. The installer will run on Linux with Wine, but it cannot detect the pedalboard through the USB connection.

    • ghassan@lemm.ee
      link
      fedilink
      arrow-up
      5
      ·
      10 months ago

      Try giving this a try. I found it suggested in the Arch wiki to update the bios. It’s basically a bootable Windows environment from a USB. You can then try running your firmware updates through it. It worked to update my bios so I assume it should easily work with updating firmware for other devices.

      • StorageB@lemmy.one
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        I hadn’t come across this when I was trying to get it to work with Wine. This looks promising - I’ll give it a try next time!

  • Dexx1s@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    10 months ago

    RGB for Corsair (iQue on windows, open to alternatives)

    What I do with my Commander is to use the onboard lighting and fan curves. Set it up on a VM or when you still have Windows.

    You can also look into Liquidctl

    • Flaky@iusearchlinux.fyi
      link
      fedilink
      English
      arrow-up
      5
      ·
      10 months ago

      If all you need is to control RGB, I’ve been satisfied with OpenRGB. OP is saying he’s running Arch, and OpenRGB was quite recently moved from the AUR to the extra repos. The relevant package is openrgb.

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      2
      ·
      10 months ago

      I may do a VM as I have to find a way to utilize my specialized music gear. I do have to say thank you for pointing me in the direction of Liquidctl though, I want to consider that.

  • gerdesj@lemmy.ml
    link
    fedilink
    English
    arrow-up
    4
    ·
    10 months ago

    Use whatever you are comfortable with and works for you. At the moment it sounds like Windows might be the path of least resistance. Fine, go with that.

    For me, I finally ditched Windows altogether around 15 years ago. Well, I say ditched - my customers and staff … haven’t.

    The list of stuff you have problems with might be tricky on Linux simply because the vendors of music gear are unlikely to give a shit. Nvidia should be fine. I have a VMware VM at home which runs Zoneminder on Ubuntu, with a passed through Nvidia GPU. Surely it should be easier on physical hardware. I wrote this: https://wiki.zoneminder.com/GPU_passthrough_in_VMWare

    You mention gaming so you’ll probably not be bothered with CUDA. You’ll need https://wiki.archlinux.org/title/NVIDIA If that doesn’t do it for you, hit the Arch forums …

    The forums can be a bit intimidating but if you keep your query concise and show some evidence of effort, someone will probably get you over the line.

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      2
      ·
      10 months ago

      I definitely appreciate your response. I truly want to ditch windows, it would be easy without my music hardware though a VM with USB passthrough may be the ticket. The issues I had with Arch and my 3090 were really with trying to go the wayland route. Though that was over a year ago I gave that a shot. I could try again, but since then I have gotten more familiarized with running arch on other systems. I have tried many other distros, and none quite catch me quite like arch.

      For my server I have already ditched windows, and went with a ubuntu server. Though I will be changing distros to something else due to differences in opinion with the way Ubuntu and Canonical conduct themselves. I would still rather see people use Ubuntu over windows, but that’s not much of a bar to pass.

      I may eventually check the forums if this time doesn’t pan out with using arch on my main rig.

      • gerdesj@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 months ago

        The logical replacement for Ubuntu is probably Debian. I have quite a lot of Ubuntu servers at work. I am quite seriously considering going upstream. I do like the LTS to LTS promise and that fits well for my customers who like to see enterprisey features without going RedHat or Oracle. You may not have had to deal with “enterprise grade” stuff which loosely translates to bloody expensive and often horrible.

        I’m an Arch fan too - actually I’m a Linux fan. I used to do Gentoo (10+ years) but I got tired of my lap overheating. Before that Slackware, Mandrake (Mandriva), RH, Yggdrassil oh and a fair bit of SuSE, not to mention everything Novell did since NetWare 3.1. Whoops, sorry, mind wandering 8)

        Wayland and Pipewire will probably do everything eventually but for now, you have functionality gaps. Pipewire is quite amazing and being developed at nearly indecent haste. It might be worth diving in to their community. At worst you will find a lot of like minded people to you.

        • Hellmo_luciferrari@lemm.eeOP
          link
          fedilink
          English
          arrow-up
          2
          ·
          10 months ago

          I haven’t exactly decided on what distro for my server, but I have used forks/offshoots of debian, namely Raspbian or Raspberry Pi OS for my Pis. I understand the hurdles and such that come along with enterprise related products, as I am an IT professional by trade. I haven’t worked with RHEL or Oracle’s offerings yet.

          I love Arch, but I too love linux. I never got into Gentoo, but I wanted to try it out just for the experience. I do get annoyed with having to compile everything from source with Arch on my laptop for exactly that reason; lap overheating. I also haven’t used Slackware, Mandrak/Mandriva, Tggdrassil, or SuSE but I have at least heard of them. And I absolutely love the conversation, mind wandering is alright by me!

          The tough pill to swallow with linux for me has been the functionality gaps between different offerings, but I love the choices I am given.

          I appreciate your time in responding!

  • Sylver@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    10 months ago

    I would wait for the cold months to pass. You’ll be paying more for heating, but if you play it right you can save on air conditioning this summer.

  • toastal@lemmy.ml
    link
    fedilink
    arrow-up
    3
    ·
    10 months ago

    Hopefully it’s all a relatively painless & bug-free experience for ya.

    Does your gear work with Guitarix?

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      2
      ·
      10 months ago

      U til you mentioned Guitarix I wasn’t even familiar with that software. Unfortunately I don’t believe there is any connectivity between PowerCab or my Helix with guitarix. But Guitarix could still be handy to me. Thank you!

  • woelkchen@lemmy.world
    link
    fedilink
    arrow-up
    5
    arrow-down
    2
    ·
    edit-2
    10 months ago

    The absolute biggest hurdles is my Nvidia problem. I have always had issues with Nvidia on Arch. I would gladly take an suggestion.

    Ouch. Buy Radeon.

    • Hellmo_luciferrari@lemm.eeOP
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      10 months ago

      Next time I build a PC I likely will just out of the necessity for consistent driver support in linux. Though AMD cards in windows have always given me lesser results.