command: sudo tlp-stat -b

output:

— TLP 1.6.1 --------------------------------------------

+++ Battery Care

Plugin: generic

Supported features: none available

+++ Battery Status: BAT0

/sys/class/power_supply/BAT0/manufacturer = DP

/sys/class/power_supply/BAT0/model_name = bq20z451

/sys/class/power_supply/BAT0/cycle_count = 666

/sys/class/power_supply/BAT0/charge_full_design = 6330 [mAh]

/sys/class/power_supply/BAT0/charge_full = 5043 [mAh]

/sys/class/power_supply/BAT0/charge_now = 4936 [mAh]

/sys/class/power_supply/BAT0/current_now = 0 [mA]

/sys/class/power_supply/BAT0/status = Full

/sys/class/power_supply/BAT0/charge_control_start_threshold = (not available)

/sys/class/power_supply/BAT0/charge_control_end_threshold = (not available)

Charge = 97.9 [%]

Capacity = 79.7 [%]

my take:

this is an apple battery, meaning this command won’t load it up to a threshold I choose (not available)

charged currently at 97.9%, even if the gui says it’s 100%

capacity is 79.7%, what for me is a very high value, considering this is a 10 year old notebook (maybe it hasn’t been used much?)

your take?

  • scrion@lemmy.world
    21·
    7 months ago

    The best way would in fact be testing it with an electronic load that applies a precise and well known load to the battery and integrates capacity until a matching shutoff condition is reached.

    However, the majority of people do not happen to have access to such an instrument, so I’d say your suggestion is a close approximation of the best way, which could be augmented by adding simple measurements, which can be done by most people at home for a reasonable, quantifiable judgment.