I think a major one is to try to avoid trusting in unfounded precision.

If you want to make lemonade like a chemist, you don’t just weigh out some lemon juice and add it to water and sugar. You measure sugar and citric acid content of the batch of lemon juice, then calculate how much water will dilute it to the right pH, and how much sugar will bring it to your desired osmolarity. In reality, no one is going to do that unless they run a business and need a completely repeatable. If you get lazy and just weigh out the same mass of stuff with a new batch of lemon juice, you could be way off. Better to just make it and taste it then adjust. Fruits, vegetables, and meats are not consistent products, so you can’t treat them as such.

If i were to be writing recipes for cooking, I would have fruits/vegetables/meats/eggs listed by quantity, not mass (e.g., 1 onion, 1 egg), but i would include a rough mass to account for regional variations in size (maybe your carrots are twice the size of mine). Spices i would not give amounts for because they are always to taste. At most, I would give ratios (e.g. 50% thyme, 25% oregano). Lots of people have old, preground spices, so they will need to use much more than someone using whole spices freshly ground. I think salt could be given as a percentage of total mass of other ingredients, but desired salinity is a wide range, so i would have to aim low and let people adjust upward.

Baking is a little different, and I really like cookbooks that use bakers percentages, however, they don’t work well for ingredients like egg that I would want to use in discrete increments. For anything with flour, I would specify brand and/or protein level. A European trying to follow an American bread recipe will likely end up disappointed because European flour usually has lower protein (growing conditions are different), which will result in different outcomes.

I will say in defense of teaspoons, most home cooks have scales that have a 1 gram resolution, though accuracy is questionable if you are only measuring a few grams or less. Teaspoons (and their smaller fractions) are going to be more accurate for those ingredients. Personally, I just have a second, smaller scale with greater resolution.

I just want cups gone for solids (and viscous stuff). It’s such an idiotic system. 1 cup of diced carrot … wtf how should I go about measuring that in the grocery store? Just tell me 1 large carrot or by weight.

I know it doesn’t need to be exact but it just doesn’t make sense to do it this way. Even with imperial units, you have ounces, why not use that?

Food science is truly complex, so in order to accurately replicate a recipe, you need to standardize pretty much everything. Currently, there’s plenty of variation and you just compensate by winging it and keeping an eye on the pot a little longer.

In order to reduce variation, we need to standardize the following:

• ingredients: The composition of meat and carrots varies a lot.
• heating methods: An oven set to 200 °C is not exactly 200 ° at every location and all the time.
• weigh everything: Volumes are complicated and messy.
• use a timer: This applies to all actions like stirring, heating etc.

All materials and methods should be accurately documented, because things like the coating or weight of your pan can introduce unwanted variability.

You should check out the super old website called “cooking for engineers”.

I’m an American biochemist, I also never learned the english system because my school transitioned to metric too fast. The mental burden of trying to cook using english units after working all day in the lab using that same part of my brain leads me to just not want to cook 95% of the time. But when I do cook I have optimized processes for my few simple recipes. When I bake I usually use a metric recipe or convert a English one, and optimize it before making a large batch of something.

Recipes should be written with the quantities in the procedure. So instead of reading

Mix flour, salt and sugar in a large mixing bowl

It should be

Mix flour (300g), salt (1/4 tsp), and sugar (20g) in a large mixing bowl

That way you don’t need to read/refer to ingredient list, read/refer to ingredient list, etc

I was a professional chemist for around ~7 and love to cook. My suggestion is to stop expecting precision with an imprecise and natural product like cooking. Are your lemons larger? They also might be sweeter, tarter, juicer etc. than others. Same thing with teaspoons. The spices you are using may be more or less concentrated than who wrote it.

Lean into the uncertainty and be free. Double or even triple spices to see if you like it. Measure with your heart

Cooking is not a standardized or reproducible process at home, because the variables outside of anybody’s control. Modern mass recipes give only the illusion of being reproducible algorithms, but they will never achieve that.

Grappling with the complexity of different tooling, supply chains, seasonality and so on, all within a recipe, is a futile effort. That complexity must be handled outside the recipe.

All solids should be listed by weight.

All liquids should be listed by volume.

SI units only. (Grams for solids, mL for liquids)

More graduated cylinders and volumetric flasks in the kitchen please.

This would only make sense, if all people were baking with the exact same ingredients, in the exact same environment, with the exact same equipment. You know, like in a factory.

For households and the like, it makes sense to have a bit of variation, until you find the way that makes it perfect for you.

Autist and scientist here: you’re thinking of baking. Baking is the science one, cooking is infuriating because all of those really vague and inaccurate instructions are in fact as precise and accurate as they need to be. Seasoning is done with the heart, you do have to stir or knead u ntil it “looks right”, “a handful” is the right amount to add. The only way to find the “right” amounts is to cook over and over until you instinctively know what enough looks like.

Anyway the ingredient I really really hate is from Jamie Oliver’s “working girl’s” pasta, where he lists “2 big handfuls of really ripe tomatoes”. I HAVE CANNED TOMATOES YOURE GETTING CANNED TOMATOES JAMIE, I DONT HAVE FUCKING TIME TO GO LOOKONG FOR REALKY RIPE TOMATOES

Also standard teaspoon is 5ml. Just use that and taste to see if it needs more.

I’ve been cooking at home, and occasionally in restaurants, since I was about ten or so. So, 40ish years.

No single standard is better than the others. It does suck that there isn’t a single one that is used as a base, and then gets converted by the cook into their preferred units and structure, but even that has issues.

The good news is that most cooking, and even most baking, is very forgiving of the kind of discrepancies between sizes of lemons, onions, etc. You don’t really run into trouble until you’re dealing with things that react chemically based on the ratio of ingredients, which is still most common in baking, and not even all baking.

Even in those types of recipes, it’s usually flour that’s the problem, not leaveners, since flour compacts readily and to a high degree. But, then again, most modern recipes like that are going to be in weight measures, or in baker’s ratios. You’d be using a scale for the fiddly recipes.

So, generally, just guesstimate your produce size the first time you make something. It’s not going to be so far off that the results will suck if the dish itself doesn’t. Then you tweak things until it fits what you prefer, which is what happens anyway as you build your recipe book/collection.

My old recipe book had scribbled notes in the margins from years of refinements. When I copied that into a digital recipe manager, I added them in directly. Now, I’m able to just enter the original recipe, then add my notes as parentheticals or whatever as I refine.

Even with those detailed notes, a given recipe won’t always be reproducible as exactly the same. That’s because you just can’t standardize everything. You use good produce, there’s going to be varying water content, slight differences in flavor compounds, more or less sugars, so to get the same results over time, the cook has to know how to adjust for those things on the fly.

Of equal import is that no matter how scientific your process of recipe development is, the table is never the same as the cook. My taste buds and brain aren’t the same as my wife’s, my kid’s, my cousin’s, etc. So there’s limits to the benefits of standardized recipes on the plate.

Now, formatting? That’s a huge help.

You want your ingredient list to include instructions about when an ingredient is used in multiple places. You want lists broken down in sections when a recipe calls for multiple procedures (like making the main dish, a sauce, and a crust).

In the instructions, make sure the ingredient quantities are included for redundancy.

If there’s an instruction about duration that’s variable explain what the variables change. As in: bake for 10 to 15 minutes. Okay, great. What’s the difference? If my stove runs hot and I go for the short time, will I see golden brown, and will 15 be burnt or just really dark? Yeah, you can’t expect identical results from one circumstance to the next, but at least drop an “until golden brown” at the very minimum.

That applies to any variable, imo, but it can get to be too much detail in complicated recipe.

Cooking and baking are chemistry, physics. But they’re also an art. The more you try to strip a recipe of flexibility, the less successful it’s going to be for the next cook.

If you’re asking scientists about writing protocols, you clearly don’t know how scientific protocols work. If anything, scientists need to take lessons from recipe writers on how to write protocols. Scientific protocols are notoriously difficult to replicate.

Here’s a burger recipe written like a scientific methodology:

Raw beef patties (Carshire Butcher) were prepared on a grill (Grillman) according to manufacturer’s instructions. The burger was assembled with the prepared patties, burger bun (Lee Bakery), lettuce (Jordan Farms), American cheese (Cairn Dairy), and various toppings as necessary. Condiments were used where appropriate. Assembled burgers were served within 15 minutes of completion.

You should look for kitchen tested recipes.

OP right now