100%

Explains the bird feathers

Who needs 20! Lol. Says more about me than you.

To back off your post, does anyone have one for Australia?

I don’t think that works on my Samsung TV, or my partners iPad though. :)

Although not especially effective on the YouTube front, it actually increases network security just by blocking api access to ad networks on those kinds of IoT and walled garden devices. Ironically my partner loves it not for YouTube but apparently all her Chinese drama streaming websites. So when we go travel and she’s subjected to those ads she’s much more frustrated than when she’s at home lol.

So the little joke while not strictly true, is pretty true just if you just say ‘streaming content provider’.

Is the copied file going to a usb? Is the usb fake? Otherwise I’m pretty sure your source is bad. Probably the disk sector if you’re sure the file was at some point complete.

Something like btrfs probably does block cloning or similar so a copy to the same disk probably just points at the same disk blocks as the original.

ffmpeg -v error -i file.avi -f null - 2>error.log

Check the source probably

Many of those types while having great brightness and reduced image burn in actually have terrible quality images. Eg no hdr, some may only be 30hz, some may have the contrast ratio which is so low you’ll just be sad to watch a movie on it looking at a black grey mush.

Though like all things, there’s a gradient. Some of the conference room monitor panels can be better but often >3x more expensive than the consumer model due to much better warranty (eg same day parts).

So I don’t have any advice here, just a bit of warning with experience with being around zoom, teams, and display walls from an IT solutions perspective,though generally I use AV partners for model selection and installation on any meaningfully sized conference/boardroom room or special application eg stages.

There have been a few cases where ports are blocked. For example on many residential port 25 is blocked. If you pay and get a static ip this often gets unblocked. Same with port 10443 on a few residential services. There’s probably more but these are issues I’ve seen.

If you think about how trivial these are to bypass, but also that often aligns to fixing the problem for why they’re blocked. Iirc port 10443 was abused by malicious actors when home routers accepted Nat- pnp from say an unpatched qnap. Automatically forwarding inbound traffic on 10443 to the nas which has terrible security flaws and was part of a wide spread botnet. If you changed the Web port, you probably also are maintaining the qnap maybe. Also port 25 can be bypassed by using start-tls authenticated mail on 587 or 465 and therefore aren’t relaying outbound mail spam from infected local computers.

Overall fair enough.

It’s paraphrasing Torvalds himself though. It’s a cheeky title.

“… and I have absolutely no excuses to delay the v6.6 release any more, so here it is,”

Mm, not quite, when say having 60+staff work in a single building model you need something that allows object locking so stag can work on part of a building and check it in and out.

I’m not the architect, I’m the sysadmin that designs and builds the server/network infrastructure for a half dozen architecture firms, some which have over 300 architects spread around Australia, Europe, and south East Asia. That mostly means running up servers to host BIM and BIM cache servers, as well as maintaining PIM servers.

To be honest I quizzed you because I honestly never heard of it and my life revolves around both revit and bim360, revit and revit self hosted bim servers, or archicad. Not that I do anything much in them, BIM managers generally administrate their own BIM instances and their teams. But some of the projects are in the billions of dollars that you’ll find on featured on the b1m YouTube channel.

Id argue that while the architects themselves are by and far the largest cost, the largest IT cost is the modelling software. I’ve even had some people using unreal engine to do parts of their work now especially for customer facing flythrough demonstrations and city view with time of day and all that.

So I’m pretty open minded to keeping my ears open to new software since I’m never sure what to expect. It would be interesting to see if it could ever be possible to do one of these megaprojects in open source. But my gut says it’s unlikely.

Does it connect to the same arcgis BIM servers so I can work with my coworkers, in real architecture projects?

After I followed the instructions and having 15 years of system administration experience. Which I was willing to help but I guess you’d rather quip.

From my perspective unless there’s something that you’ve not yet disclosed, if wireguard can get to the public domain, like a vps, then tailscale would work. Since it’s mechanically doing the same thing, being wireguard with a gui and a vps hosted by tailscale.

If your ISP however is blocking ports and destinations maybe there are factors in play, usually ones that can be overcome. But your answer is to pay for mechanically the same thing. Which is fine, but I suspect there’s a knowledge gap.

Are you sure? Did you want to troubleshoot this or did you just want to give up?

I’ve got two synology nas connected to each other directly for hyper backup replications at clients because both units are on cgnat isps and there’s no public IP. And it just works.

Didn’t understand that by willing you meant wanting.

I use Ubuntu, it’s the default for ROS. I tried debian but the instructions didn’t work instantly so I just as quickly gave up and went back to Ubuntu since I was busy. Lol.

Yes, but first go check which list you want to use since they’re a good starting point to understand a kind of level of tolerance and expectations around your experience.

There’s lots of lists around here’s a small sample:
https://arstech.net/pi-hole-blocking-lists-2023/

Be prepared for a bump in time outs as you work through things you might need (I blocked by accident a bunch of needed Microsoft services that I need to use during my job).

I haven’t edited my white list in months, maybe over a year. It’s going very well. I’ve been running pihole on ubuntu for more than 5 years as two virtual machines. I’m happy.

To be honest I think we have different cultural values here. The way I read this and the way you read it is clearly different. I’m disappointed by how little I had my expectations changed, while you had them moved more.

I think the question is, where can you bet on a single coin flip? Maybe because I’m Australian, there’s only one day a year you can bet on a (two) coin flip legally here. Everyone else seems to generally understand that coin flips aren’t fair for gambling and therefore is illegal.

If this paper was like ‘this is how corruption in sports…’ rather than ‘this is like that magician cup and balls trick’ then I’d understand your concern.

But like you said, you don’t even have a coin in the house, so the practical side is day to day, perhaps not even once a year, not only are you not deciding on a coin flip, even if you were, you’d (or whomever was flipping it for you) have to learn a technique to see it affect you.

When the horses have all bolted, BBC is the one to close the barn door.

I’m not in America but the organisation for NIST recommends it in guidance now and its getting backing by the nsa

https://www.nsa.gov/Press-Room/News-Highlights/Article/Article/3215760/nsa-releases-guidance-on-how-to-protect-against-software-memory-safety-issues/

https://www.zdnet.com/article/nsa-to-developers-think-about-switching-from-c-and-c-to-a-memory-safe-programming-language/ https://www.malwarebytes.com/blog/news/2022/11/nsa-guidance-on-how-to-avoid-software-memory-safety-issues

I see this becoming required in the future for new projects and solutions when working for new governnent solutions. The drum is certainly beating louder in the media about it.