• bstix@feddit.dk
    link
    fedilink
    English
    arrow-up
    93
    ·
    1 year ago

    Only Satan would design a hole that is smaller than the end of a bent paperclip when the entire purpose of the hole is to put something into it.

      • CleoTheWizard@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        For anyone else who ever has this problem, there are easier ways than a paper clip and hammer.

        I have used pencil lead (0.5mm) successfully. You get a short piece and push hard, it might hurt your thumb a bit but it works. Obviously most needles work but I have used things like safety pins from the back of a shirt pin. I’ve also used the tip of mechanical pencils in a pinch. And if you’re crafty you can do something (carefully) with a toothpick and a knife to shave the tip down. Dumbest thing I’ve ever used is a disposable flosser that had a toothpick on the end. I also used that to clean USB C ports. All of these also similarly work on small reset buttons on routers and such.

      • bstix@feddit.dk
        link
        fedilink
        English
        arrow-up
        1
        ·
        9 months ago

        I guess it’s called a SIM card eject pin tool, but you’ll usually find them in cell phone toolkits.

        • leanleft@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          9 months ago

          some are thicker or thinner than others. some phones have a superthin hole. so some ejectors or a paperclip won’t work (for some phones).

          maybe the superthin variety is the most common variety out there. but i have a collection and they are nearly all thick.

    • leanleft@lemmy.ml
      link
      fedilink
      English
      arrow-up
      1
      ·
      9 months ago

      there must be an everyday item that functions as a makeshift alternative.

  • TurboWafflz@lemmy.world
    link
    fedilink
    arrow-up
    38
    ·
    1 year ago

    I keep one on my keys since it’s useful for pushing reset buttons and things and if I really need to it even works as a screwdriver

      • Doctor xNo@r.nf
        link
        fedilink
        English
        arrow-up
        4
        ·
        1 year ago

        Got it a 7 years ago, haven’t lost the ejector since… Even amazes myself everytime I need it and it’s still there… 😅 Before this mine usually didn’t last a week.

      • Doctor xNo@r.nf
        link
        fedilink
        English
        arrow-up
        3
        ·
        1 year ago

        Yeah, I urgently need a new one but I keep postponing and forgetting. 😅 It used to be a cheap fake leather one which looked cool, has a crocodile head on the outside in it, and just plainly looked cool. Now, 5 years later, all the leather, except for the crocodile head, has proven to be a thin layer that has come off over time and what remains is a completely exposed (again, except for the crocodile head) black rubbery underlayer. 😅 Oh, well, it cost me €5 or something, I guess 5 years was a good service at that price…

  • psycho_driver@lemmy.world
    link
    fedilink
    arrow-up
    17
    ·
    1 year ago

    I have like 7 of these in a container next to me. I don’t think responsible is the word that would be associated with that behaviour.

    PS - paperclips work fine for this purpose.

    • frostycakes@lemmy.ml
      link
      fedilink
      English
      arrow-up
      7
      ·
      1 year ago

      I used to keep one on my keys back when I worked at a carrier store selling phones. Made life so much easier then.

      In fact, the actual inserted part broke off years ago (and I haven’t done phone sales in over a decade), but the main part of the body is actually still attached to my keyring. I haven’t even thought about that until this post, actually.

      • ChickenLadyLovesLife@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        edit-2
        1 year ago

        The dude who sold me my latest smartphone this year had one long fingernail. I kinda thought it was a coke nail until he applied my screen protector and used the nail to separate the plastic backing from it. Aha!

        I studied classical guitar in high school and since I could never keep my real fingernails intact I always had three plastic nails going on my right hand. That was a tough one to explain to the local bullies.

    • skqweezy@lemm.ee
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      Ngl that’s pretty smart to keep one on a keychain, better than keeping it in the original box

  • linearchaos@lemmy.world
    link
    fedilink
    English
    arrow-up
    14
    ·
    1 year ago

    I mean, they fit on a keychain, which is fucking great; Sadly, they stab you through the pants pocket so they’re fucking rude.

      • linearchaos@lemmy.world
        link
        fedilink
        English
        arrow-up
        1
        ·
        1 year ago

        I don’t know what in the hell I did, I have one of the solid circular round ones with a small hole in the back for the keychain. It’s been on my keys for ages. One morning I went to put my seat belt on and got a sharp stab. I pulled my keys out and it was bent 90° and I just the tiniest little bit of blood on it.

    • flashgnash@lemm.ee
      link
      fedilink
      arrow-up
      12
      ·
      1 year ago

      You’re either really good at holding onto those things, or really good at losing/breaking phones

    • ky56@aussie.zone
      link
      fedilink
      arrow-up
      6
      arrow-down
      1
      ·
      1 year ago

      Good. I don’t like sim trays. They’re small and flimsy and irritating and are easily lost. Not like here. Here everything is built-in and solid.

  • 0x2d@lemmy.ml
    link
    fedilink
    arrow-up
    11
    ·
    1 year ago

    i usually grab a breadboard jumper wire and shove it in my sim card slot 😂

    • veroxii@aussie.zone
      link
      fedilink
      arrow-up
      11
      ·
      1 year ago

      As someone traveling to other countries a few times a year, eSims have been a game changer.

    • kenopsik@lemm.ee
      link
      fedilink
      arrow-up
      6
      ·
      1 year ago

      These little ejector tools are useful for more than just SIM cards. CD/DVD ROM drives have force eject buttons inside tiny little holes that these can reach and push. Many hardware reset buttons are also hidden inside tiny holes.

      You could use an unfolded paperclip in a pinch. One of my air purifiers has a reset button inside a hole that is slightly too thin for the paper lips I have on hand. But the SIM ejector tool I keep around fits perfectly.

      • AstridWipenaugh@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        1 year ago

        I use an esim with a Pixel and Google Fi. The setup process is this:

        1. Sign in to Google account
        2. Complete normal phone setup
        3. Confirm notification prompt to use this device with my fi account
        4. Never make phone calls ew gross
          • AstridWipenaugh@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            edit-2
            1 year ago

            Yep! I have a normal phone number and get unlimited voice and sms, and 5g data metered data at $10/GB. They have an unlimited plan too, but metered works best for me. It’s actually serviced by ATT and Verizon IIRC, so you connect to whichever is best.

  • Gork@lemm.ee
    link
    fedilink
    arrow-up
    11
    arrow-down
    1
    ·
    1 year ago

    I have a Moonlander split keyboard that is programmable and uses one of these little things for its reset button. My only gripe with it is that they could have designed a place for it to slot into the keyboard itself since it’s very easy to lose it if it isn’t otherwise attached to something.

      • Gork@lemm.ee
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        The reset button is used to apply firmware changes. For this keyboard you can customize the keys to pretty much however you like. I have one of the thumb cluster buttons set to Ctrl-C / Ctrl-V for efficiency. It’s great for making changes to personalize your mechanical keyboard experience… but it requires that pin to make changes lol.

        I like it since I can assign Enter to one of the left thumb cluster buttons, you normally can’t hit enter with your left hand on a standard keyboard layout.

  • Spoonbit@lemmy.ml
    link
    fedilink
    arrow-up
    9
    ·
    1 year ago

    I fixit gang. If you did not know, some of the ifixit kits have a screwdriver bit that is just for that